# text: "This copy of MultiTimer is on is locked or read-only disk. You will not be able to create new timer modules or to save any timer data. Copy MultiTimer onto your hard disk for normal use."
DITL_131.txt
# 3 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=255 y1=84 x2=315 y2=104
# text: "OK"
# item 1: BUTTON (0x04) enabled
# bounds: x1=182 y1=85 x2=242 y2=105
# text: "Cancel"
# item 2: TEXT (0x88) disabled
# bounds: x1=78 y1=13 x2=316 y2=77
# text: "Stop automatically opening the file “^0” whenever this module’s timer is started?"
DITL_132.txt
# 3 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=275 y1=80 x2=335 y2=100
# text: "OK"
# item 1: BUTTON (0x04) enabled
# bounds: x1=193 y1=80 x2=251 y2=100
# text: "Cancel"
# item 2: TEXT (0x88) disabled
# bounds: x1=78 y1=13 x2=334 y2=74
# text: "Stop the timer in ^0^1^2 and switch to another module?"
DITL_133.txt
# 3 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=256 y1=78 x2=316 y2=98
# text: "OK"
# item 1: BUTTON (0x04) enabled
# bounds: x1=183 y1=78 x2=243 y2=98
# text: "Cancel"
# item 2: TEXT (0x88) disabled
# bounds: x1=78 y1=13 x2=317 y2=62
# text: "Stop the timer in ^0^1^2 and quit MultiTimer?"
DITL_134.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=255 y1=67 x2=315 y2=87
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=13 y1=13 x2=313 y2=60
# text: "The file “^0” will be automatically opened whenever this module’s timer is started."
DITL_135.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=251 y1=102 x2=311 y2=122
# text: "Quit"
# item 1: TEXT (0x88) disabled
# bounds: x1=78 y1=13 x2=311 y2=91
# text: "MultiTimer’s data file is already open. If you have more than one copy of MultiTimer in this folder, you should delete one or move it to another folder."
DITL_136.txt
# 4 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=289 y1=116 x2=349 y2=136
# text: "Yes"
# item 1: BUTTON (0x04) enabled
# bounds: x1=216 y1=117 x2=276 y2=137
# text: "No"
# item 2: TEXT (0x88) disabled
# bounds: x1=79 y1=13 x2=355 y2=61
# text: "Your keyboard and mouse were inactive for a total of ^0 minutes since this MultiTimer session was started."
# item 3: TEXT (0x88) disabled
# bounds: x1=79 y1=73 x2=352 y2=105
# text: "Do you want to subtract this amount from the module’s total?"
DITL_137.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=256 y1=69 x2=316 y2=89
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=78 y1=13 x2=318 y2=62
# text: "Log-keeping is now ON for ^0^1^2."
DITL_138.txt
# 4 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=299 y1=69 x2=357 y2=89
# text: "OK"
# item 1: CHECKBOX (0x05) enabled
# bounds: x1=64 y1=55 x2=214 y2=73
# text: "Delete log file now"
# item 2: ICON (0xA0) disabled
# bounds: x1=15 y1=18 x2=47 y2=50
# ICON resource ID: 2
# item 3: TEXT (0x88) disabled
# bounds: x1=64 y1=13 x2=358 y2=49
# text: "Log-keeping is now OFF for ^0^1^2."
DITL_139.txt
# 11 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=281 y1=142 x2=339 y2=162
# text: "OK"
# item 1: BUTTON (0x04) enabled
# bounds: x1=205 y1=142 x2=263 y2=162
# text: "Cancel"
# item 2: CHECKBOX (0x05) enabled
# bounds: x1=74 y1=18 x2=187 y2=35
# text: "Sound effects"
# item 3: TEXT (0x88) disabled
# bounds: x1=74 y1=52 x2=184 y2=70
# text: "Save data every"
# item 4: EDIT_TEXT (0x10) enabled
# bounds: x1=188 y1=52 x2=213 y2=68
# text: "5"
# item 5: TEXT (0x88) disabled
# bounds: x1=217 y1=53 x2=275 y2=70
# text: "minutes"
# item 6: CUSTOM (0x80) disabled
# bounds: x1=0 y1=0 x2=61 y2=176
# data: ""
# item 7: CHECKBOX (0x05) enabled
# bounds: x1=74 y1=86 x2=346 y2=102
# text: "Notify me when my Mac has been idle"
# item 8: EDIT_TEXT (0x10) enabled
# bounds: x1=191 y1=106 x2=216 y2=122
# text: "10"
# item 9: TEXT (0x88) disabled
# bounds: x1=92 y1=106 x2=186 y2=122
# text: "for more than"
# item 10: TEXT (0x88) disabled
# bounds: x1=220 y1=106 x2=282 y2=122
# text: "minutes"
DITL_140.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=256 y1=70 x2=316 y2=90
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=78 y1=13 x2=315 y2=63
# text: "That file can’t be replace because it is in use or locked. Please choose another name."
DITL_141.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=222 y1=75 x2=282 y2=95
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=78 y1=13 x2=270 y2=65
# text: "Can’t turn on Log-keeping because MultiTimer is on a locked or read-only disk."
DITL_142.txt
# 3 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=228 y1=109 x2=317 y2=129
# text: "New Log"
# item 1: BUTTON (0x04) enabled
# bounds: x1=79 y1=109 x2=203 y2=129
# text: "Log-Keeping Off"
# item 2: TEXT (0x88) disabled
# bounds: x1=78 y1=12 x2=315 y2=94
# text: "The log file for the module “^0” isn’t in the MultiTimer Logs folder. Do you want to start a new log, or turn off log-keeping?"
DITL_143.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=251 y1=90 x2=311 y2=110
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=78 y1=13 x2=314 y2=80
# text: "MultiTimer is out of memory. Please quit and use the Finder’s “Get Info” to increase MultiTimer’s memory allocation."
DITL_144.txt
# 3 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=231 y1=71 x2=291 y2=91
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=13 y1=13 x2=294 y2=49
# text: "Code accepted. \nThis copy of MultiTimer is now registered."
# item 2: TEXT (0x88) disabled
# bounds: x1=13 y1=58 x2=118 y2=75
# text: "Thanks again!!"
DITL_145.txt
# 3 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=215 y1=77 x2=288 y2=97
# text: "Try Again"
# item 1: BUTTON (0x04) enabled
# bounds: x1=22 y1=77 x2=90 y2=97
# text: "Exit"
# item 2: TEXT (0x88) disabled
# bounds: x1=16 y1=12 x2=289 y2=64
# text: "Sorry, that code didn’t work. \nMake sure both the code and your name are typed correctly."
DITL_146.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=256 y1=77 x2=316 y2=97
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=78 y1=13 x2=315 y2=63
# text: "There is already a module with the name “^0”. Please choose another name."
DITL_147.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=252 y1=67 x2=318 y2=87
# text: "Continue"
# item 1: TEXT (0x88) disabled
# bounds: x1=78 y1=13 x2=315 y2=63
# text: "Sorry, the Auto-Open file “^0” could not be found. "
DITL_200.txt
# 5 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=95 y1=288 x2=153 y2=308
# text: "OK"
# item 1: CUSTOM (0x80) disabled
# bounds: x1=6 y1=4 x2=243 y2=170
# data: ""
# item 2: CUSTOM (0x80) disabled
# bounds: x1=4 y1=212 x2=244 y2=277
# data: ""
# item 3: CUSTOM (0x80) disabled
# bounds: x1=211 y1=65 x2=239 y2=81
# data: ""
# item 4: CUSTOM (0x80) disabled
# bounds: x1=3 y1=176 x2=246 y2=203
# data: ""
DITL_201_CustomGetFile.txt
# 11 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=252 y1=181 x2=332 y2=201
# text: "Select"
# item 1: BUTTON (0x04) enabled
# bounds: x1=252 y1=150 x2=332 y2=170
# text: "Cancel"
# item 2: UNKNOWN (0x81) disabled
# bounds: x1=0 y1=0 x2=0 y2=0
# data: 0001E866
# item 3: CUSTOM (0x00) enabled
# bounds: x1=235 y1=54 x2=337 y2=70
# data: ""
# item 4: BUTTON (0x04) enabled
# bounds: x1=252 y1=78 x2=332 y2=98
# text: "Eject"
# item 5: BUTTON (0x04) enabled
# bounds: x1=252 y1=106 x2=332 y2=126
# text: "Desktop"
# item 6: CUSTOM (0x00) enabled
# bounds: x1=12 y1=75 x2=230 y2=205
# data: ""
# item 7: CUSTOM (0x00) enabled
# bounds: x1=12 y1=52 x2=230 y2=71
# data: ""
# item 8: PICTURE (0xC0) disabled
# bounds: x1=251 y1=137 x2=333 y2=138
# PICT resource ID: 11
# item 9: TEXT (0x88) disabled
# bounds: x1=12 y1=7 x2=340 y2=45
# text: "Select an application or document to be opened whenever you start this module’s timer:"
# item 10: PICTURE (0xC0) disabled
# bounds: x1=9 y1=42 x2=340 y2=43
# PICT resource ID: 11
DITL_300.txt
# 8 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=266 y1=248 x2=341 y2=268
# text: "Next"
# item 1: BUTTON (0x04) enabled
# bounds: x1=137 y1=248 x2=212 y2=268
# text: "Done"
# item 2: BUTTON (0x04) enabled
# bounds: x1=12 y1=248 x2=87 y2=268
# text: "Previous"
# item 3: CUSTOM (0x80) disabled
# bounds: x1=14 y1=80 x2=46 y2=112
# data: ""
# item 4: CUSTOM (0x80) disabled
# bounds: x1=5 y1=27 x2=351 y2=154
# data: ""
# item 5: CUSTOM (0x80) disabled
# bounds: x1=2 y1=156 x2=354 y2=240
# data: ""
# item 6: TEXT (0x88) disabled
# bounds: x1=66 y1=6 x2=230 y2=22
# text: "MultiTimer Instructions; "
# item 7: CUSTOM (0x80) disabled
# bounds: x1=231 y1=6 x2=263 y2=22
# data: ""
DITL_400.txt
# 5 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=209 y1=147 x2=342 y2=167
# text: "Fill Out Order Form"
# item 1: BUTTON (0x04) enabled
# bounds: x1=99 y1=147 x2=186 y2=167
# text: "Enter Code"
# item 2: BUTTON (0x04) enabled
# bounds: x1=15 y1=147 x2=80 y2=167
# text: "Not Yet"
# item 3: CUSTOM (0x80) disabled
# bounds: x1=9 y1=31 x2=347 y2=134
# data: ""
# item 4: TEXT (0x88) disabled
# bounds: x1=39 y1=8 x2=317 y2=24
# text: "This is an unregistered copy of MultiTimer"
DITL_401.txt
# 6 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=176 y1=161 x2=241 y2=181
# text: "Register"
# item 1: BUTTON (0x04) enabled
# bounds: x1=19 y1=160 x2=77 y2=180
# text: "Cancel"
# item 2: EDIT_TEXT (0x10) enabled
# bounds: x1=30 y1=94 x2=230 y2=110
# text: "Your name"
# item 3: EDIT_TEXT (0x10) enabled
# bounds: x1=30 y1=126 x2=230 y2=142
# text: "Your registration code"
# item 4: TEXT (0x88) disabled
# bounds: x1=28 y1=30 x2=223 y2=82
# text: "Please enter your name and registration code EXACTLY as you received them from me."